CTgrow's TRX-6 pilot relay unit is the link between our system and your electrical network. It offers advanced switching and control capabilities for a wide range of electrical systems and devices.
With the addition of industrial-type contactor relays, the TRX-6 unit can be easily used to switch and control high power loads like industrial grow lighting, large pumps, or other specialized equipment.
All six TRX-6 relays can be easily programmed and controlled with multiple sensor values, countless timers, or just simply by hand with the press of a button from within our special control software.
The TRX-6 is packed with smart features such as programmable ramp-up / ramp-down settings for any relay control that's based on sensors, so you can closely simulate natural outdoor conditions.
The 6 pilot relays can be programmed to use dual sensors. This offers the possibility (for example) to control your ventilation on both relative air-humidity and temperature levels with just one relay.
The TRX-6 is designed with the security and protection of your crops in mind, in case of problems it will automatically shut down within 60 seconds and after a power loss, it will recover automatically and safely.
Need a custom solution or got a question? Please let us know!
6-way pilot relay unit
TRX-6
To RCX-1 controller
Control Units
TRX-6 Relay control unit
TRX-6 Relay control unit
New product
The TRX-6 Relay control unit offers 6 individual controllable relay's to a CTgrow system controller. This relay unit can be used to control/regulate large industrial contactors (powerful industrial relays).
Any of the 6 onboard relays can be easily controlled by any sensor value, timer settings, or simply by hand with the press of a button in our special control software.
More info
The TRX-6 offers a great solution to connect our special system controllers to large (industrial) electrical power panels and power control rooms.
It offers fast relay switching capability with 6 fully independent computer-controllable power relays. Any relay on the TRX-6 can be controlled by any sensor value (Dual sensors), timer settings, or simply by hand with the press of a button in our special control software. The TRX-6 CTG-POWERLINK connector is waterproof (ip68 rated). And comes with a 16 ft cable.
Use the TRX-6 to control its 6 independent relays with any sensor or timer value. You can program up to 50 timers per relay or simply control it directly in manual mode. The TRX-6 ensures a full controllable powerful remote relay switch box with high reliability and excellent long-term stability.
TRX-6 Additional Features:
6 fully independent controllable relays (NO or NC)
Fully controllable by CTgrow system controllers
Can be placed up to 16ft from the controller/extender
Industrial waterproof (ip68) connectors
Fast & easy installation procedure.
can handle REGULAR loads up to 2800 watts
Industrial quality switching techniques
Build with only the highest quality parts
Very reliable and accurate switching capability's
TRX-6 Specifications:
Model name Cable length CTG-LINK Powered Ports On-board relays (NO /NC) Dimensions L x W x H Maximum load TRX-6 unit Maximum load single relay | : : : : : : : | TRX-6 Relay control unit Appr. 16 ft 1x Powered CTG-LINK 6x (computer controllable) ± 5.31 x 7.87 x 3.93 Inch 230v* / 6x 12Amp (regular load) 230v* / 12Amp (regular load) |